"Worth the Cash or To the Trash"–AcuRite Weather Center review

As we were wandering around the hardware store last summer we came across this AcuRite Weather Center (model 00615).  We weren’t in the market for a weather station but it was on sale and as we walked the store getting the things we came for we convinced ourselves that we just couldn’t live off-grid without this particular weather station right now… Long story short we were the proud new owners of this piece of technology.

This is a 3 in 1 model, it measures; temperature/humidity (inside and out), wind speed and barometric pressure.  The kit comes with a display unit and the 3 in 1 sensor that is mounted outside in a location of your choice.  The display unit houses loads of good information as seen below and even has trending arrows for outside temp/humidity and pressure as well as a bottom scroller that you can adjust to flash the info that is most important to you.

ARDisplay
Display Unit

The 3 in 1 sensor was very easy to install, and certainly seems like it would be easy to install in numerous locations.  It is really the work horse as it wirelessly transmits all the data to the display unit inside.  The instruction manual says to keep the display unit and sensor within 330 feet of each other and I think we are certainly at that limit and operating fine.

3n1
3 in 1 Sensor

 

While this a great product overall and we are certainly happy we did make the decision to buy it.  We have identified a few opportunities for improvement…

1. It has a “future forecast” feature in which it “predicts” near term weather using the trending temperatures and barometric pressure.  We are doing better licking our finger and sticking it out the door to create our forecasts than this weather center does.

2. We think it needs a backlight on the Display Unit. It would probably be better if we didn’t know it was 45mph winds at 1:00 in the morning but dangit we still feel we should be able to if we want to.

3. You lose your historical data when you change the batteries in the Display Unit.  Simple solution is to just write it down if you are interested in saving it, wish I would have thought about that before I changed the batteries. 🙂

It’s important to understand that we weren’t shopping for a weather station so we just got one on the spur of the moment… If we had been shopping for one, it’s pretty likely that we could have found one that would have solved problems 2 and 3 at least…These are very minor flaws for us, we definitely feel like we made the right decision on this purchase.  While we may upgrade to a more robust weather station in the future we think this was a great start and was Worth the Cash!